These are the kinds of forms already kept in Symon. A number is for a reading you will want to compare later. A fixed list is for yes or no, pass or fail, or a level such as empty, quarter, half, or full. A line of text is for the fault message or the note that goes with a work order.
Occupational health and safety
This is one of the important uses. The check is recorded on the equipment before someone climbs, ties off, or goes up in a lift, and it can also be asked on a round.
- Safety board. Are ear plugs, safety glasses, masks, and gloves there? Is the first-aid kit full? Is the eye wash still in date?
- Ladder. Rungs, bolts, rust, cracks, twisted rails, and the instruction stickers, each marked pass or fail. This one is kept on the ladder itself.
- Harness and lanyard. Hardware, webbing, stitching, and labels, pass or fail, before the equipment is used. A lanyard also checks the rope and the energy absorber.
- Scissor lift, before use. Controls work, rails and gates are in place, and the protective equipment for that job was checked.
Fire and life safety
- Fire extinguisher, monthly. Hanging in place, seal and pin in, gauge in the green, tag signed, and no sign it has been tampered with.
- Fire hose cabinet. Hose on the hangers, nozzle moves, discharge hardware in place, tag signed, and the lock works.
- Fire door. It releases, closes fully, and resets.
- Fire alarm panel. Any alarm present, and whether a work order was created.
Readings and running checks
These are usually asked while walking a round. When the answer is no, the next question is often whether a work order was raised.
- Pumps. Running or not, the high and low pressure, and a note when something looks wrong.
- Boilers. Pressure, water temperature, stack temperature, and any alarm on the controller.
- Generators. Leaks, a lamp test, the day-tank fuel level, and whether the block heater is warm. A separate set records the readings while it is running.
- Fuel tank. Alarms, how much is in the tank, temperature, rust or leaks, and whether liquid is in the space between the walls.
- Air handler and motor control center. A gauge reading, or whether every breaker is still in its normal position.
Use one set per kind of check. Attach it to the equipment when the record belongs to that asset. Attach it to a round when the questions should come up every time that equipment is scanned.